Flower Girl Figurine Garden Sculpture with Powertex

This is my first attempt at a figurine. She took me a long time to finally get finished, having started her over a year ago at my Level 1 Powertex Tutor Training! Now that she is finally done I love my Flower Girl – and I call her ‘Bestower of Beauty’.

She stands approx. 49cm high.

Materials used:

• Powertex Fabric Hardener: Bronze
• Wooden Base
• Grace Plaster Head – European Collection
• Recycled Textile Yarn (T shirt Yarn), mixed recycled crochet and cotton fabrics, Stockinette and lace strips
• Tin foil, masking tape, toilet roll inner card tube
• Powercotton
• Stone Art
• 3D Sand and Balls
• Silicone Moulds: Daisies and Leaves Mould Set, small daisy and fern (from my stash)
• Powercolor Pigments: Ultramarine, Green and Titanium White
• Colortricx Pigments: Bronze Gold
• The Secret Art Loft Pigments: Lipstick Fizz, Green Ginger, Blue Curacao, Interference Blue, Mojito Lime, Interference Lilac, Violet Valentine, Limoncello Gold
• Easy Varnish

How it was done:
The body was shaped over the wooden pole using the card inner tube stuffed and wrapped with foil and covered with masking tape. The plaster head was taped onto the top.
T shirt yarn was then wound tightly around the torso and down to the base of the pole. I made a bit of a decorative wrap over the torso to create the dress bodice. The whole thing was then given a coat of Bronze Powertex, working it well into the fabric.

Fabrics were then coated with Powertex and draped over the body to create the clothing. I used a knitted fabric (Stockinette) to create the illusion of arms by allowing the knit to curl around on itself to give dimension.

A small amount of Power Cotton was added to make small hair plaits draped over her shoulder, and fine lace added to make a headdress. Another piece of T shirt yarn was used to create a tie belt and helped to hold the skirt securely in place. The crochet skirt was draped down and over the base.

During the training course I started the dry brushing technique, mixing pigments into Easy Varnish, to add some colour and bring out the different textures. I used Bronze Colortricx to colour the face, shoulders and hair, plus to add colour around the base. Blue and green Powercolors were used (mixed with a little white) to dry brush and highlight clothing texture.

I was delighted with what I had achieved but came home with my figurine always intending to add more colour (you know how I LOVE colour) and floral embellishments to turn her into a gorgeous flower girl. Sadly she sat in the corner for around a year before I finally pulled her back onto my work bench!

I began by adding much more colour, intense in places, to colour her clothing using the new colours from The Secret Art Loft. I tried to keep most of this colour to the top layers of texture so as to keep depth in the fabric folds. I also added more colour to her face and lips, plus a little shading over the eye lids.

Flower and leaf embellishments were created using Art Stone mixed with Powertex to make a clay which was pressed into silicone moulds. When dry they were coloured with Secret Art Loft Pigments mixed with Easy Varnish and glued in place with Powertex. I also created a suggestion of arms and hands using Stone Art clay. The bad modelling was disguised by carefully placing the bouquet of flowers in her arms – ha ha.

 

The flowers were also applied onto her dress and down around the base. More texture was added to the base by sprinkling 3D Sand & Balls into wet Powertex.

I spiralled the flowers down and around the hem of her skirt.

Here you can see lots of textures in her outfit, and pretty coloured flowers in her hair.

Another view showing her back.

She looks beautiful standing in the garden. Although she is weather proof I would definitely have to add extra weight (e.g. a concrete base) or add a small garden spike to the base, as she is very vulnerable to toppling over in the wind. I am going to be keeping her indoors so she will be ok as she is.

However, she does look gorgeous alongside my unicorn! I might change my mind and adapt the base for outdoors – sure that I have a bit of broken paving slab somewhere – that would do the trick.

 I hope that you like my ‘Bestower of Beauty’.

 Bye for now, Anne x.

Tropical Art Doll Mixed Media with Powertex

I have never tried making an Art Doll before and I had so much fun making this. I wanted to make her really bright and cheerful with a tropical feel – the fabulous zingy cocktail colours from The Secret Art Loft Pigments, Inks, and Acrylics range were perfect.

Materials Used

• Art Doll MDF Kit A5 
• Powertex Fabric Hardener: Transparent, Ivory and Bronze
• Easycoat Mat
• Easy Structure
• Easy Varnish
• 3D Sand
• The Secret Art Loft Acrylics: Orange Marmalade, Lemon Meringue, Raspberry Sorbet, Blueberry Pie
• The Secret Art Loft Inks: Egg Yolk, Tangerine and Metallic Golden
• The Secret Art Loft Pigments: Pink Flamingo, Limoncello Gold, Tequila Sunrise
• Seed beads (pink), leaf beads (cerise and orange) and flower drop bead (orange)
• Large metal filigree embellishment, small MDF teardrop (for bird beak), sequins (pink)
• Copper beading wires (pink colour coated) – 0.8mm and 1mm
• Round nosed and flat nosed jewellery pliers, wire cutters (for cutting and shaping wires)
• Small sections of plastic tube (drinking straws could be used)
• Faux silk flowers (wired stems), scrap cotton fabric strips, cotton fibres pulled from fabric (aqua), and thin pink ribbon
• Fine glitter (green)
• Art Quotes Stencil (The Secret Art Loft) and texture stencil (from my stash)

Extras used on the canvas: A4 canvas board, White Paper Decoration, 3D Sand and Balls, Assorted Lace Strips, dried beech nut outer shells and pine cone, small paper clay flowers, old key, gold glitter plus mix blue & green seed beads.
 
How it was done:

First all the MDF components were popped out of the sheet and coated with Ivory or Bronze Powertex Fabric Hardener and left to dry. The box frame was constructed and hanger section attached (the Powertex acts as a glue too). I also coated one of the ‘waste pieces’ which I thought would make a great bird shape to insert into the box frame.

A background panel for the box frame was cut from the FAB images on the packaging sheet and glued in place using Easycoat decoupage medium. Acrylic Inks were used to add a tint of colour.

Easy Structure paste was applied through a texture stencil onto the large background panel and to sections of the frame. The Art Quotes Stencil was used to apply text to the frame, and to apply random sections of text to the wings.

When dry, translucent inks were used to tint the text on the frame. The outer background panel was coloured with Lemon Meringue and Orange Marmalade acrylics, then brushed over with a little Metallic Golden Ink to highlight the texture, before sticking down the box frame.

The birdy shaped waste MDF piece was coloured with acrylic paints and layered into the box using Transparent Powertex to glue. The metallic embellishment was coated with Ivory Powertex and stuck down. The beak coated with Bronze Powertex, and eyes created with seed beads (dark centres created with Bronze Powertex, drizzled into the bead hole with a cocktail stick).

Transparent Powertex was used to coat the fabric flowers and massaged into the aqua cotton fibres. It was also drizzled around the sides to embed the seed beads. A little sand was mixed with Transparent Powertex to make a 3D glue paste to help hold the flower stems in place.

More acrylic paints were used to colour, and to brush over textured surfaces. Easy Varnish was used to stick down sequins, and to embed glitter which was brushed over sections for extra sparkle. Pearl Pigments in Varnish were also applied with dry brushing to add shimmer. I just love a bit of bling.

The headdress and face were dry brushed with Pink Flamingo and Limoncello Gold Pigments mixed with Easy Varnish. Sequins and beads were added for more texture and bling. 1mm wire was used to make a hanging loop.

The wings were coloured with Acrylic Paints and Gold Ink and …  yes I had to add some glitter sparkle too.

Fabric strips and ribbon were treated with Transparent Powertex and used to wrap sections of plastic tubing to create beads for the upper arms and legs. The upper arms were attached with 1mm wire, through the holes in the box frame, in such a way that they were held in place (i.e. not dangling). This enabled the lower arm dangles to hang each side of the body.

The upper leg sections were attached so that they hung freely at the base giving movement. The lower arm and leg shapes were dry brushed with Varnish and Pearl Pigments, and beads stuck down with Transparent Powertex. These were hung from the upper arm and leg beads using wire loops so they dangled freely. Leaf and flower bead dangles were also added to the frame base and legs using 0.8mm wire (1mm was too thick to fit the bead holes).

The floral MDF shape was painted with acrylics, embellished with a metal filigree shapes and seed beads before gluing to the main background panel.

My finished Art Doll just makes me so happy. I love her bright happy colours. Plenty of bling and dangles too – cannot help but smile.

After using all the provided shapes to create her I looked at the pile of waste MDF bits left behind – they inspired me to create a canvas. I never waste anything – ha ha.

I coloured the background canvas with Bronze Powertex. Texture and the text was then applied using Easy Structure paste through the stencils. I just love this sentiment from the Art Quotes Stencil.

All the waste bits were coated with Ivory Powertex and applied down. I tried not to think about it too much – as I can spend hours procrastinating on positioning stuff! I just wanted to be free and ‘go for it’ and see what happened.

I then started coating some of the embellishments and building up the scene. Sand & Balls were added into wet Powertex and then coloured with inks and by dropping in some pigment powders.

I built up a sort of tree on the left hand side using Paper Decoration and lace, adding the Beech nuts and pine cone to embellish. 

More acrylic colour was added, and beads added by embedding in we Transparent Powertex. Pearl Pigments were added to varnish for dry brushing over some of the textures. Finally I just couldn’t help myself but had to add some gold glitter mixed into the varnish. More yummy bling.

The finished piece is fairly crazy and abstract but I was pleased with it. I thought that it looked like a foreground beach with water, sand and trees, then rising up in the background were buildings positioned up a hillside. A kind of tropical paradise I thought. You may see something completely different. That is the joy of abstract art. I had to pop in the key to ‘unlock the mystery’. I hope that you like my mad idea for using up all the scrap MDF bits.

Bye for now, Anne x.

Dream, Wish, Create a Beautiful World

This lovely image of a young girl (Victorian Photographs Rice Paper) really called to me and inspired me to make this piece. To me she portrayed a young girl that had experienced in her life far more than any child should.  Alone she would dream and wish for a better world. Her creativity would enable her to escape from the trauma and open the door to a world full of beauty.

I know that many can testify that using imagination and creativity really does take them to a happy place and can increase wellbeing. Sorry, maybe a bit heavy? I hope that you like the ‘beautiful world’ that I have created.

I first collected together lots of elements from my stash; a small wooden pallet (15cm square from Art-C), a thick greyboard panel with frame (13.5cm X 5cm, 6cm X 2cm centre, from Tando Creative) plus smaller panel, silicone moulds to create flowers and fern, MDF Heart Keyplate, Penny Washer and Heart Flower (Powertex), scraps cotton fabric and lace.

I created the flowers and ferns using silicone moulds and Stone Art Clay. Stone Art was mixed approx. 50:50 with Ivory Powertex plus a little Transparent Powertex. Ivory Poweretex was also used to coat the inner greyboard pieces.

The wooden pallet and remaining greyboard and MDF pieces were coated with a leftovers mix of Powertex (mainly Lead and Ivory). I keep any leftover Powertex in recycled little takeaway sauce pots (plastic with fully airtight lids). My mix gave a lovely warm grey colour.

I spread Easy Structure Paste across the centre of the pallet and then spritzed with Green Bister.

The rice paper images were applied to the Ivory Powertex coated panels using Easy Coat Mat Medium. Note: the sentiment is actually snipped from the ‘Creative Paper’ branding down the side of the paper. I also used some small leftover snips from a floral paper.

Cotton fabric was treated with Ivory Powertex and draped diagonally across the middle. More texture was added using 3D Sand & Balls.

The flowers, ferns, Heart Flower and Penny Washer were coloured with Acrylic Inks; Palm Leaf, Viola, Viola Metallic and Golden Metallic. A little gold colour was also applied to the edges of the keyplate and image panels, plus drizzled onto the texture paste. The fabric was spritzed with a little Green Bister.

A strip of thin fabric braid was treated with Powertex, coiled tightly into a spiral, and added to the MDF flower centre (coloured with gold ink when dry). A sheet of Angelina fibre was created by ironing heat fusible sparkly fibres between sheets of baking parchment. I collected together a few snips of lace plus some Powercotton.

Next I put it all together. I hung a small metal ‘wish’ charm from the base.

I used Easy Structure Paste through the Duo Arty Quotes Mini  Stencil to add the ‘Dream’ sentiment.

More Acrylic Ink colour was dry brushed over textured areas.

I love the new Acrylic Inks. The fluid formula enables you to drizzle areas with intense colour too.

I was really pleased with my ‘Dream, Create, Wish’ mini artwork. I think that I might just have to keep this one for me.

Off to get busy as I have so many ideas. I will share more soon. Hugs all xxx.

Steampunk Jewellery Plier Stands using Powertex

I have been meaning to decorate my jewellery plier stands for ages and finally got them finished.

I had a bit of a problem with these in that they started off as a plain varnished wood surface. I initially coated them with white Gesso with a view to painting them with acrylics. However, the Gesso did not bind well to the varnish layer – eek! All ideas were halted. These need to be fairly robust and a tonne of flaky chips after a short use was not what I wanted!

I then discovered Powertex and yay, I would be able to rescue and decorate my plier stands after all. Coating the entire surface with rice papers and torn kitchen towels would create a tough protective skin over the surface and prevent the feared chipping off of the base layers.

HOW IT WAS DONE

I first collected together lots of embellishments; die cut cogs and pipework (Sizzix dies), MDF Keyplate (Powertex), metal clock hand and chains, old light bulbs and screws.

I tore out images from Creative Rice Paper (Powertex). This particular sheet seems to be out of stock but there is a similar Victorian Steampunk Paper available. I also separated layers of kitchen paper and tore them into pieces to coat the surface. This would add texture and a protective layer.

STAGE ONE

First I applied the torn decorative papers using Easy Coat Mat Medium. Ivory Powertex was then painted on to blend in the image edges. 

STAGE TWO

Next layers of kitchen paper were bonded all over the surface. Some were glued down with Ivory and some with Terracotta Powertex. Die cut card embellishments were also coated with Powertex and glued down.

Texture was added by applying Easy Structure Paste through a texture stencil.

I also had a try at the rust technique. I mixed some Rusty Powder into Ivory Powertex along with a few drops of white wine vinegar. This was painted and dribbled over the surface (extra powder sprinkled on top) and spritzed with water and vinegar before leaving overnight to develop. I spritzed at intervals, several times. I avoided the areas that will be in contact with my pliers. 

STAGE THREE

Next I brushed over and added colour using Acrylic Inks in Tangerine, Egg Yolk, Aqua and Metallic Gold.  

STAGE FOUR

I also applied a little gold Pebeo Gilding Wax on some areas. When fully dry and cured (I left them for 3 weeks) I coated the surface with Easy Varnish to fully seal and protect.

I have included lots of images of how all the surfaces were built up.  

Texture and die cut cogs have been added. 

Rust and colour added. 

Side finished with stronger thick greyboard embellishments. Any large embellishments protruding from edges need to be strong (thinner card would be prone to warp and bend).

I started with a larger clock image on the other side. 

Die cuts and texture added plus a metal clock hand for dimension.

Finally finished with thicker embellishments and more dry brush work and gilding wax.

Love this character. 

Texture and layers built up. Waiting for the rust to develop. 

Building up the layers of transparent colour makes so much difference.

The second plier stand started off in the same way. 

At this stage you might feel like giving up. What a mess! 

Just keep going, adding layers of rust texture and colour.  

Just loving the gorgeous layers of texture and colour.

I used several layers of the die cut pipework together to make them thicker and stronger on this side. 

Wooohooo – this is soooooo yummy (or is it just me – tee hee).

Another end panel. 

I used an MDF keyplate (Powertex) to embellish this end. 

The final colouring makes such a difference.

The final side had a couple of little storage wells. I won’t really be using these so a perfect place to embellish with larger items. 

I had fun adding recycled light bulbs, screws and bits of chain etc. I used structure paste and Powertex treated kitchen paper as a 3D glue to hold things in place. 

Initially I had added a thinner die cut cog to the end but it wasn’t really strong enough. Here I added another thick greyboard cog over the first. Much more practical. I also added a small MDF Butterfly.

Here you can see more of the Steampunk treasures added. I also added some 3D Sand and Balls. 

Love this Steampunk birdie peering out.

Well I hope that all these pictures have not overwhelmed you. I wanted to show how all the stages were built up. It also shows the stages that look awful, perhaps where a beginner might give up! Remember, if it all goes wrong just keep applying colour, inks or coloured varnishes. If this fails and you are really not happy – just paint over the whole thing with a base colour of Powertex and start again.

Hugs, Anne xxx.